t echnical data sheet tnc 50 ? right angle jack solder end 56k201- 200n5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18 -0 fax : +49 8684 18 - 499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is pr otected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/0 8 .1 3/6.1 all dimensions are in mm; tolerances according to iso 2768 m - h interface according to iec 60 169 - 17, mil - prf - 39012, din en 122200 documents assembly instruction b 6 material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact brass flash white bronze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe
t echnical data sheet tnc 50 ? right angle jack solder end 56k201- 200n5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18 -0 fax : +49 8684 18 - 499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is pr otected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/0 8 .1 3/6.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss 28 db, dc to 1 ghz 22 db, 1 to 2 ghz 20 db, 2 to 4 ghz insertion loss 0.05 db, dc to 4 ghz insulation resistance 5 x10 3 m ? center contact resistance 1.5 m ? outer contact resistance 1 m ? test voltage 1500 v rms working voltage 500 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz - - interface only ? mechanical data mating cycles 500 center contact captivation: axial 15 n coupling test torque 1.7 nm recommended torque 0.46 nm to 0.69 nm environmental data temperature range -65 c to +165 c therma l shock mil - std - 202, method 107, cond ition b corrosion mil - std - 202, meth od 101, cond ition b vibration mil - std - 202, meth od 204, cond ition b shock mil - std - 202, meth od 213, cond ition g moisture resistance mil - std - 202, meth od 106 rohs compliant tooling n/a suitable cables n/a weight weight 17.3 g/pce draft date approved date rev. engineering change number name date inge mhlauer 06.09.04 a. gasteiger 24.03.14 d00 14- 0352 t. krojer 24.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and n o statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
